Clearview pool manual#
Are the doors fitted with a self closing and self latching device that will activate immediately after use and will return the door to the closed and latched position without the use of a manual force? The self closing device must be capable of operating and activating the latching device when the door is at any position, from resting on the latching mechanism to fully open.Is the openable portion of the window covered by a mesh screen that complies with the test for strength and rigidity (not a standard fly screen) and that is fixed to the building with fasteners that can only be removed by the use of a tool?.
Clearview pool windows#
Clearview pool install#
Install a shield, on the outside of the lower fence panel, to the junction where the stepped fence panels meet.raise the lower fence panel until a clear distance of 900mm is achieved when measured from the bottom horizontal rail of the upper fence panel and the top horizontal rail of the lower fence panel and ensure any gaps created beneath the fence are no greater than 100mm.No? – Is there a distance of 900mm between the bottom horizontal rail of the top (upper) fence panel and the top horizontal rail of the stepped (lower) fence panel?If not either: Is your pool fence built on level ground, without any steps in the fence panels?.No? – Either remove the potential handholds and footholds or shield them using any durable non-climbable material, such as acrylic or polycarbonate sheeting or aviary wire that has holes no greater than 13mm. Is the distance between any potential handholds and footholds on the pool fence and its associated space at least 900mm apart to inhibit a young child from climbing over it?.No? – Install an additional horizontal rail along the top horizontal rail so that there is 900mm between the upper surfaces of the bottom and top horizontal rails. If you have a timber pool fence and the vertical rails are more than 10mm apart, is there a distance of at least 900mm between the top and bottom horizontal rails?.No? – Either reposition the vertical rails or install additional rails so that gaps between the rails are no greater than 100mm. Are all vertical rails on the fence less than 100mm apart?.No? – Reduce the gap by either attaching additional material to the bottom of the fence or concreting rocks, bricks etc. Is the gap between the bottom of the fence and the ground less than 100mm?.No? – Install 1.8m high fencing to those sections of the boundary fence that form part of the pool safety barrier. If a boundary fence forms part of the pool barrier, and your pool was built after 2006, is the boundary fence at least 1800mm high?.No? – Remove vegetation from around the fence line or raise the pool fence until there is a continual height of at least 1200mm achieved. Is the outside of the pool fence at least 1200mm high all the way around when measured from ground level?.Is there a pool fence or other child-resistant barrier separating the pool from your house and adjoining properties and public spaces at all times?.Bring in a water sample from your pool to your local BioGuard Dealer and you'll receive personalized instructions for start-up, closing and maintenance.
Clearview pool professional#
.jpg "clearview pool")
With regular access to education and training, they will always be prepared to give you the best solution for your pool and spa care needs. WHY BUY BIOGUARD? Friendly, Professional AdviceīioGuard Dealers are experienced pool and spa care professionals.
0 kommentar(er)
